BAD Lever Alternatives: 7 Things You Should Know

BAD Lever Alternatives

Every shooter knows how crucial it is to have BAD lever alternatives with flawless actions that operate freely and easily. When it comes to rapid fire and hitting a target, this becomes very critical. Some shooters have complained about the performance of the Rifle Battery Assist Device (BAD) Lever, which was developed to enhance the action of AR-15 rifles.

We’ve got you covered if you’re trying to find an alternative for the BAD Lever. In this article, we’ll go over three options that can vastly enhance your time out on the range. Moreover, we will compare the Magpul vs. Troy alternative specifications to help you choose a better option.

Let’s get going!

BAD Lever Alternatives – Overview

BAD Lever Alternatives

The Geissele Super Dynamic Enhanced (SD-E) Trigger is an alternative to the BAD Lever. The precision and pinpoint accuracy of your AR-15 rifle may be greatly enhanced by installing this trigger. With its two-stage construction, the trigger pull is always smooth and precise. The trigger of the SD-E may be changed to suit the shooter’s finger.

The CMC Triggers Single Stage Curved Trigger is yet another excellent option. Competition shooters who place the highest demands on their guns will appreciate this trigger’s design.

The reduced weight of the trigger guard pull is one of its distinguishing qualities, making it easier to maintain accuracy even during rapid fire. Furthermore, the CMC Triggers Single Stage Curved Trigger Guard may be customized to fit your finger placement and shooting preferences.

Comparing the BAD bolt release to the UTG Model 47 Ergonomic Pistol Shooting Grip, which is a more cost-effective option. This shooting grip aims to make shooting more pleasant and manageable.

Because of its rough surface, you can maintain a secure hold on your rifle even if your left hand is wet. If you want to modify your rifle without breaking the bank, the UTG Model 47 Ergonomic Pistol Grip is a wonderful alternative.

What Does BAD Lever Mean?

What Does BAD Lever Mean

The Rifle Battery Assist Device (BAD) Lever is a cutting-edge new accessory that simplifies the left hand of your AR-15 rifle. This inexpensive but useful accessory may be attached to either the left or right side of the receiver, giving you more room to use the charging handle.

The BAD bolt release has a 45-degree offset built in so that optics and other accessories may be placed above the receiver without interfering with the lever’s operation.

High-strength polymer is used to make the BAD bolt release, making it durable enough to survive years of constant usage. In addition to being simple to set up, it won’t alter your gun.

Simply remove the latch roll pin from your existing charging handle and replace it with the one that came with your BAD bolt release. Black, flat dark earth, and olive drab green are the three colors offered for the BAD bolt release right now.

The BAD bolt release is a useful accessory for the AR-15 that can simplify its use. It is the best option if you want to easily upgrade the performance of your left-hand AR-15.

Who Makes the BAD Lever?

Noveske Rifleworks is the manufacturer of the BAD bolt release.

Who Makes the BAD Lever

Noveske is an artillery producer based in Grants Pass, Oregon, USA. John Noveske established the business in 2001. Noveske Rifleworks is a manufacturer that caters to the government, police, and civilian sectors by making AR-15-type rifles and accessories.

Noveske Rifleworks’ BAD bolt release is an excellent option if you own an AR-15 and want to upgrade its functionality with minimal effort. Adding the BAD bolt release to your rifle’s charging handle is a simple process that gives you more room to work with.

What Does Magpul BAD Lever Do?

To facilitate the use of the charging left hand of an AR-15 rifle, Magpul created the BAD lever. When attached to either side of the receiver, the BAD bolt release gives you more room to work for the charging left hand.

To accommodate optics or other attachments installed on top of the receiver, the BAD bolt release is offset 45 degrees.

Magpul’s BAD bolt release is made of durable polymer and can sustain repeated usage for a long time. Easy to mount in minutes with no gunsmithing required, this accessory is a great addition to your weapon.

Replace the stock latch roll pin in the charging handle with the one that comes with the BAD bolt release. There are now three color options for the Magpul BAD bolt release: standard black, flat dark earth, and olive drab.

Magpul BAD Lever VS Troy

AR systems featured ambidextrous controls to match the convenience of current semiautomatic handguns. Our team was intrigued by these characteristics and opted to outfit one of our rifles with a variation between Magpul’s Bad Lever vs Troy’s.

Let’s get into the details!

Specification Chart

Magpul BAD Lever


Face Length (Thickest):



Face Width (Smallest):



Depth from Arm to Receiver:



Width at Smallest:



Width at Thickest:



Arm Length:




0.25 oz

0.30 oz

Troy and Magpul BAD Release Lever – Key Differences

Troy and Magpul BAD Release Lever
  1. It’s true that the Magpul BAD bolt release is made to operate with the vast majority of AR15s, but it doesn’t mean that Troy is compatible with every single one.
  2. On the left side, the Magpul looks to merely have a bigger place for the bolt release, whereas the Troy appears to have a dedicated area for both the catch and release.
  3. The Troy device was built sturdier and used a flat-head screw plus a tiny Allen screw to secure it in place, in contrast to the Magpul unit’s single locking screw.
  4. Each device has a similar clamshell cover that secures the release button. A set screw at the rear secures Troy’s sliding metal backpiece, which cannot be removed like the BAD’s back, which can be easily removed by just undoing it.
  5. Troy’s extension drops swivel around to the right side of the receiver, placing the control pad to the user’s immediate left.

Troy Pros & Cons

  • Boosts Productivity and Efficiency
  • Textured, Thin, and Snag-Resistant
  • Solid 6061-T6 Aluminum is Used in the Manufacturing Process.
  • Slim and Graceful
  • The Ability to Pull the Bolt Catch Back and Release it with a Trigger Finger
  • Some Claim it’s Too Lax
  • The Trigger Guard is Crowded

Magpul Pros & Cons

  • Use the Trigger Finger to Release the Bolt
  • Reduces Unnecessary Movements
  • Improved Bolt Performance
  • More Rapid Double Feed
  • Cleaning Up Issues is Simpler
  • Lots of Loctite is Needed to Hold it Together
  • The Slot on a Flat-Head Screw isn’t Very Deep

In-Depth Comparison

Troy and Magpul BAD Release Lever

Our goal is to help you find the best alternatives for your needs and budget. We have listed all of the features for both Troy and Magpul to help you out in the longer run.

Troy & Magpul BAD Lever Pricing

Due to the fact that the Magpul Bad Lever and the Troy both provide almost the same pricing as well as the same features, it is essentially difficult to choose between the two without just flipping a coin.

However, a dollar could make a difference, and the Troy release lever still wins this round since it’s cheaper than the Magpul BAD lever by that much.


Troy’s unit looks to have more strength than the slender Magpul’s arm from the outside. However, the massive squared-off bolt release face is something we didn’t like because it adds a sizable piece of metal and doesn’t go well with the rifle, unlike the BAD’s, which nearly flows with the contours of the gun.

The Magpul’s BAD lever is sleek and flowing, but Troy’s lever is considerably square and substantial in form. So, the former gained another point as a result.

Magpul BAD Bolt Catch & Troy Bolt Release Operation

We believe the Troy is superior to the Magpul BAD in this area based on our years of experience as gun enthusiasts. Our favorite feature of the Troy was its left-hand release lever, since it automatically returned the support hand to the foregrip after loading a magazine spring.

This allowed us to release the bolt more quickly. With this improvement, having the ability to engage the bolt catch without having to remove the strong left hand was a desirable characteristic.


According to the data, the Troy ABR is bigger in virtually every dimension; the one exception is the arm that shooters activate with trigger finger. The weight of the Magpul BAD is 0.25 ounces, whereas the Troy ABR is 0.3 ounces.

Magpul BAD came out on top in this match because having lighter attachments for rifles is preferable.


There is no wiggle, like there is with the Magpul lever, in the case of the Troy, which makes it quite easy to install. It has a frictionless engagement that makes locking and unlocking the bolt simple, and rechambering rounds is a breeze to feel.

It typically takes an effort to use the standard manual of arms and press the bolt release paddle on the AR. However, we’ve discovered that it’s nearly impossible to send the bolt home during a mag release change when a loop sling is being used for stability because doing so would cause the sling to shift out of its shooting position.

Troy ABR is the one who ultimately resolves the issue, he gets the point for this.

Length of Magpul BAD & Troy Bolt Release

Magpul’s extended bolt release, which protrudes slightly for the index trigger finger to grip, gives one confidence in the company’s product’s durability and quality.

Nonetheless, we think the Troy is a better ambidextrous bolt release than the Magpul since it has fewer movements thanks to a second small Allen screw that attaches it to the bolt release paddle. This is a big plus point for Troy.

Verdict – Magpul BAD Lever vs Troy

When picking between the Magpul BAD Lever and the Troy, we recommend going with the Troy ABR since it has a quick engagement that can lock or unlock the bolt and eliminates motion that isn’t being used.

It employs two hexagonal set screws measuring 0.05 inches. It has improved ambidextrous controls and bolt release function, allowing for faster double feed and a stronger firing grip.


What does a bad lever do?

The B.A.D. (Battery Assist Device) lever is a paddle that extends to the right side of the weapon, enabling manipulation of the bolt stop from the shooting position. This greatly improves the speed and efficiency of the AR15/M4 bolt catch, which is a common point of criticism of the platform.

Does the military use bolt actions?

Due to the increased use of semi-automatic and selective-fire weaponry in today’s military and law enforcement, bolt-action rifles have been relegated to the role of sniper rifles.

Is a lever action worth it?

Lever actions have a solid reputation for being durable and dependable. The outdoorsman or survivalist would be hard-pressed to find a better firearm. In reality, lever actions are more fragile and prone to malfunction than any other type of modern gun.

What is the lever on the left side of an AR15?

When the last bullet is discharged from the magazine, the bolt is locked open by a lever on the left side of the M-16/M-4/AR-15 called the “bolt catch.” This lever is activated by a spring.

What does a MagPul do?

Magpul’s original design was intended to make tactical magazine swaps easier under pressure. Synthetic rubber loop with an indented surface that is long-lasting and provides a firm grip firing grip.


BAD Lever is an enhancement to the AR platform that is often overlooked. As a result, you may strike the ping-pong paddle in your non-shooting position with your right or left thumb without risking injury. As the shooter won’t have to move as much, he can double-feed his weapon more swiftly and effectively. Not bad for such a minimal augmentation!

Among the two models which one do you think is the best choice for you and why? Was this article helpful for you to learn about all your concerns?

Share your thoughts with us in the comment section below and help us to improve more!


My first deer at the age of 45 I joined the deer hunting fraternity a little late, but the desire to hunt has always been there. I love hunting, so I often have to deal with hunting equipment.